Set pause time

Use this action to set how long a WiLight irrigation pause switch pauses watering.

Using this action from the user interface

If you prefer building automations and scripts visually, Home Assistant walks you through this action step by step. You pick what to target, tweak a few options, and save. No YAML knowledge required.

To set the pause time from an automation or a script:

1. Go to Settings > Automations & scenes.
2. Open an existing automation or script, or select Create automation > Create new automation.
3. If you’re setting up a new automation, add a trigger in the When section. Scripts don’t need a trigger. They run when something else calls them.
4. In the Then do section, select Add action.
5. Select what you want to control. Under By target (see Targets), select the WiLight pause switch.
6. From the actions shown for that target, select Set pause time.
7. Enter the pause duration.
8. Select Save.

Options in the UI

Using this action in YAML

If you work directly in YAML, or you want to know exactly what Home Assistant does under the hood, this section has the technical reference. It lists the field names you use in YAML, their types, and which ones are required.

In YAML, refer to this action as wilight.set_pause_time. A basic example looks like this:

action: wilight.set_pause_time
target:
  entity_id: switch.irrigation_pause
data:
  pause_time: 4

This sets the pause time for switch.irrigation_pause to 4 hours.

Options in YAML

Targets of the action

This action requires a target. The target is the object of the action. You can point the action at a single entityAn entity represents a sensor, actor, or function in Home Assistant. Entities are used to monitor physical properties or to control other entities. An entity is usually part of a device or a service. [Learn more], a device, an area, a floor, or a label, and Home Assistant will run the action on every matching switch entity behind that target.

• Entity: one specific switch entity, such as switch.living_room.
• Device: every switch entity that belongs to a device.
• Area: every switch entity in a room or area.
• Floor: every switch entity on a floor.
• Label: every switch entity that shares a label.

You can also select different target types in one action. For example, you can add a specific entity and an area as targets in the same action to run the action on both of them at once.

Good to know

This action works with WiLight pause switch entities. The pause switch also supports standard switch actions, such as turn on and turn off.

Still stuck?

The Home Assistant community is quick to help: join Discord for real-time chat, post on the community forum with the action you’re calling and what you expected to happen, or share on our subreddit /r/homeassistant.