Stop cover tilt

Use this action to stop a cover while it is tilting, for example to leave the slats at a partial angle.

Using this action from the user interface

If you prefer building automations and scripts visually, Home Assistant walks you through this action step by step. You pick what to target, tweak a few options, and save. No YAML knowledge required.

To stop a cover tilt from an automation or a script:

1. Go to Settings > Automations & scenes.
2. Open an existing automation or script, or select Create automation > Create new automation.
3. If you’re setting up a new automation, add a trigger in the When section. Scripts don’t need a trigger. They run when something else calls them.
4. In the Then do section, select Add action.
5. Select what you want to control. Under By target (see Targets), select the cover you want to stop.
6. From the actions shown for that target, select Stop cover tilt.
7. Select Save.

Options in the UI

This action has no additional options beyond the target.

Using this action in YAML

If you work directly in YAML, or you want to know exactly what Home Assistant does under the hood, this section has the technical reference. It lists the field names you use in YAML, their types, and which ones are required.

In YAML, refer to this action as cover.stop_cover_tilt. A basic example looks like this:

action: cover.stop_cover_tilt
target:
  entity_id: cover.living_room_blind

This stops the tilting of cover.living_room_blind.

Options in YAML

This action has no additional YAML options beyond the target.

Targets of the action

This action requires a target. The target is the object of the action. You can point the action at a single entityAn entity represents a sensor, actor, or function in Home Assistant. Entities are used to monitor physical properties or to control other entities. An entity is usually part of a device or a service. [Learn more], a device, an area, a floor, or a label, and Home Assistant will run the action on every matching cover entity behind that target.

• Entity: one specific cover entity, such as cover.living_room.
• Device: every cover entity that belongs to a device.
• Area: every cover entity in a room or area.
• Floor: every cover entity on a floor.
• Label: every cover entity that shares a label.

You can also select different target types in one action. For example, you can add a specific entity and an area as targets in the same action to run the action on both of them at once.

Good to know

• This action only works with cover entities that support tilting.

Try it yourself

Ready to test this? Open Developer tools > Actions, search for this action, fill in the fields, and select Perform action. You see what happens on your actual entitiesAn entity represents a sensor, actor, or function in Home Assistant. Entities are used to monitor physical properties or to control other entities. An entity is usually part of a device or a service. [Learn more] without writing a line of YAML.

More examples

Real scenarios where this action shows up in automations and scripts. Copy any example and adapt it to your setup.

Automation: stop a cover tilt with a button

Stop a cover tilt each time you press a button, for example to halt the slats at any angle.

• Trigger: Button is pressed
• Action: Stop cover tilt
  • Target: Living room blind

- alias: "Stop the living room blind tilt with a button"
  triggers:
    - trigger: state
      entity_id: input_button.stop_blind_tilt
  actions:
    - action: cover.stop_cover_tilt
      target:
        entity_id: cover.living_room_blind

Still stuck?

The Home Assistant community is quick to help: join Discord for real-time chat, post on the community forum with the action you’re calling and what you expected to happen, or share on our subreddit /r/homeassistant.

Related actions

These actions work well alongside this one:

• Open cover tilt: Tilts a cover open.

• Close cover tilt: Tilts a cover closed.

• Toggle cover tilt: Toggles a cover tilt open or closed.

• Set cover tilt position: Tilts a cover to a specific position.