2024.12.2
Home ▸ Integrations ▸

WMS WebControl pro

The WMS WebControl pro integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] allows you to integrate WAREMA devices into Home Assistant.

This integration uses a local API which is available with firmware container version 11H.

See device section for support information: covers, lights and scenes.

Configuration

To add the WMS WebControl pro hub to your Home Assistant instance, use this My button:

WMS WebControl pro can be auto-discovered by Home Assistant. If an instance was found, it will be shown as Discovered. You can then set it up right away.

Manual configuration steps

If it wasn’t discovered automatically, don’t worry! You can set up a manual integration entry:

  • Browse to your Home Assistant instance.

  • Go to Settings > Devices & Services.

  • In the bottom right corner, select the Add Integration button.

  • From the list, select WMS WebControl pro.

  • Follow the instructions on screen to complete the setup.

The WMS WebControl pro may also be discovered on your local network via DHCP.

Covers

  • Patio awnings can be opened, closed, set to a certain position and their movement stopped.
  • The integration and library may already support other types of awnings with a single motor.

Lights

  • Dimmers (with brightness control) and switches are fully supported.

Scenes

  • Scenes can be activated, but not changed or monitored.
  • Scenes are accessible via a virtual device per room.

Related links