WeatherFlow
The WeatherFlow integrationIntegrations connect and integrate Home Assistant with your devices, services, and more.
[Learn more] is a local-only integrationIntegrations connect and integrate Home Assistant with your devices, services, and more.
[Learn more] that reads weather data from all WeatherFlow Tempest compatible weather station on the local network.
[Learn more].
Configuration
To add the WeatherFlow integration to your Home Assistant instance, use this My button:
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the Add Integration button.
-
From the list, select WeatherFlow.
-
Follow the instructions on screen to complete the setup.
Sensors
This integrationIntegrations connect and integrate Home Assistant with your devices, services, and more.
[Learn more] will expose the following sensors:
- Air density
- Air pressure
- Dew point
- Feels like
- Humidity
- Illuminance
- Irradiance
- Lightning average distance
- Lightning count
- Precipitation
- Precipitation amount
- Precipitation type
- Temperature
- UV index
- Vapor pressure
- Wet bulb temperature
- Wind direction
- Wind direction average
- Wind gust
- Wind lull
- Wind speed
Diagnostic sensors
Additionally the following diagnostic sensors are available:
- Battery voltage
- Signal strength
- Uptime
Networking notes
This integrationIntegrations connect and integrate Home Assistant with your devices, services, and more.
[Learn more] relies on the ability of Home Assistant to receive UDP traffic on port 50222. You may run into trouble if you have a more complex network setup utilizing either VLANs or multiple subnets.