2026.5.0
Home ▸ Integrations

Lunatone

The Lunatone integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] is used to integrate with the devices of Lunatone that offer a REST API. This allows you to use lights in Home Assistant that are connected to the DALI bus via your device.

Supported devices

Right now the following devices are supported:

Important

Home Assistant automatic discovery requires device firmware version 1.17.1 or later. Manual setup is available with device firmware version 1.14.1 or later.

Prerequisites

Before setting up the Lunatone integration, ensure you have:

  1. Your gateway device powered and connected to your network.
  2. The IP address or hostname of your device.

Configuration

To add the Lunatone hub to your Home Assistant instance, use this My button:

Lunatone can be auto-discovered by Home Assistant. If an instance was found, it will be shown as Discovered. You can then set it up right away.

Manual configuration steps

If it wasn’t discovered automatically, don’t worry! You can set up a manual integration entry:

  • Browse to your Home Assistant instance.

  • Go to Settings > Devices & services.

  • In the bottom right corner, select the Add Integration button.

  • From the list, select Lunatone.

  • Follow the instructions on screen to complete the setup.

URL

The URL to your gateway device. For example: http://10.0.0.131

Supported functionality

Entities

The Lunatone integration provides the following entities.

Lights

  • Brightness

    • Description: Control the brightness of the light
    • Available for devices: all

  • Color Temperature

    • Description: Control the color temperature of the light
    • Available for devices: Devices with firmware version 1.17.0 or later

  • RGB Color

    • Description: Control the RGB color of the light
    • Available for devices: Devices with firmware version 1.17.0 or later

  • RGBW Color

    • Description: Control the RGBW color of the light
    • Available for devices: Devices with firmware version 1.17.0 or later

Removing the integration

This integration follows standard integration removal. No extra steps are required.

To remove an integration instance from Home Assistant

  1. Go to Settings > Devices & services and select the integration card.
  2. From the list of devices, select the integration instance you want to remove.
  3. Next to the entry, select the three dots menu. Then, select Delete.