flux switch platform will change the temperature of your lights similar to the way flux works on your computer, using circadian rhythm. They will be bright during the day, and gradually fade to a red/orange at night.
The integration will update your lights based on the time of day. It will only affect lights that are turned on and listed in the flux configuration.
During the day (in between
start time and
sunset time), it will fade the lights from the
start_colortemp to the
sunset_colortemp. After sunset (between
stop_time), the lights will fade from the
sunset_colortemp to the
stop_colortemp. If the lights are still on after the
stop_time it will continue to change the light to the
stop_colortemp until the light is turned off. The fade effect is created by updating the lights periodically.
The color temperature is specified kelvin, and accepted values are between 1000 and 40000 kelvin. Lower values will seem more red, while higher will look more white.
If you want to update at variable intervals, you can leave the switch turned off and use automation rules that call the service
switch.<name>_update whenever you want the lights updated, where
<name> equals the
name: property in the switch configuration.
To use the Flux switch in your installation, add the following to your
# Example configuration.yaml entry switch: - platform: flux lights: - light.desk - light.lamp
array list of light entities.
The name to use when displaying this switch.
The start time.
The stop time.
The color temperature at the start.
The sun set color temperature.
The color temperature at the end.
The brightness of the lights.
If true, brightness will not be adjusted besides color temperature.
Select how color temperature is passed to lights. Valid values are
Transition time in seconds for the light changes (high values may not be supported by all light models).
Frequency in seconds at which the lights should be updated.
# Example configuration.yaml entry switch: - platform: flux lights: - light.desk - light.lamp name: Fluxer start_time: '7:00' stop_time: '23:00' start_colortemp: 4000 sunset_colortemp: 3000 stop_colortemp: 1900 brightness: 200 disable_brightness_adjust: true mode: xy transition: 30 interval: 60