AquaLogic
The AquaLogic component provides connectivity to a Hayward/Goldline AquaLogic/ProLogic pool controller. Note that an RS-485 to Ethernet adapter connected to the pool controller is required.
There is currently support for the following device types within Home Assistant:
Configuration
To add the AquaLogic component to your installation, add the following to your configuration.yaml file:
# Example configuration.yaml entry
aqualogic:
host: IP_ADDRESS
port: PORT
Sensor
Once you have enabled the AquaLogic component, add the following to your configuration.yaml file:
# Example configuration.yaml entry
sensor:
- platform: aqualogic
monitored_conditions:
- pool_temp
Configuration Variables
- monitored_conditions
-
(list)(Optional)List of items you want to monitor.
Default value: all
-
- air_temp
-
The air temperature.
- pool_temp
-
The pool temperature.
- spa_temp
-
The spa temperature.
- pool_chlorinator
-
The pool chlorinator setting.
- spa_chlorinator
-
The spa chlorinator setting.
- salt_level
-
The current salt level.
- pump_speed
-
The current pump speed (Hayward VS pumps only).
- pump_power
-
The current pump power usage (Hayward VS pumps only).
- status
-
The current system status.
Switch
Once you have enabled the AquaLogic component, add the following to your configuration.yaml file:
# Example configuration.yaml entry
switch:
- platform: aqualogic
monitored_conditions:
- lights
- filter
Configuration Variables
- monitored_conditions
-
(list)(Optional)List of items you want to monitor/control.
Default value: all
-
- filter
-
Controls the filter pump.
- filter_low_speed
-
Controls low speed mode on the filter pump (multi-speed pumps only).
- lights
-
Controls the Lights relay.
- aux_1
-
Controls the Aux 1 relay.
- aux_2
-
Controls the Aux 2 relay.
- aux_3
-
Controls the Aux 3 relay.
- aux_4
-
Controls the Aux 4 relay.
- aux_5
-
Controls the Aux 5 relay.
- aux_6
-
Controls the Aux 6 relay.
- aux_7
-
Controls the Aux 7 relay.