rejseplanen sensor will provide you with travel details for Danish public transport, using timetable data from Rejseplanen.
Add a sensor to your
configuration.yaml file as shown in the example:
# Example configuration.yaml entry sensor: - platform: rejseplanen stop_id: 'YOUR_STOP_ID'
stop_id can be obtained by looking up the name of the stop at this link:
(Replace “STOP_NAME” with city or location you want id for)
find the stop and copy the
id field with the trailing zeros.
The sensor can filter the timetables by one or more routes, directions and types. The known types are listed in the table below.
If you use the direction filter it’s important to put correct destination, or else the sensor will not work at all. The direction has to be the destination(s) for the transport type(s) for the departure stop destination, and NOT the stop where you want to get off. Check http://rejseplanen.dk and make a search, and use the destinations from there in your configuration. Make sure you use the exact name as the destination(s)
A working example on how to use this sensor with direction:
# Example configuration.yaml entry with the correct use of direction. sensor: - platform: rejseplanen stop_id: '008600615' direction: - 'CPH Lufthavn' - 'Helsingør St.'
A NOT WORKING example use this sensor with direction:
# Example configuration.yaml entry with the correct use of direction. sensor: - platform: rejseplanen stop_id: '008600615' direction: - 'København H'
It fails because the destination from the departure is NOT København H, but ‘CPH Lufthavn’, ‘Helsingør St.’ and others.
A more extensive example on how to use this sensor:
# Example configuration.yaml entry sensor: - platform: rejseplanen stop_id: '000045740' route: 'Bus 350S' direction: - 'Herlev St.' - 'Ballerup St.'