freebox component allows you to observe and control Freebox router.
There is currently support for the following device types within Home Assistant:
If you have enabled the discovery component,
your Freebox should be detected automatically. Otherwise, you can set it
up manually in your
freebox: host: foobar.fbxos.fr port: 1234
You can find out your Freebox host and port by opening
this address in your browser. The
returned json should contain an api_domain (
host) and a https_port (
You must have set a password for your Freebox router web administration page. Enable the option “Permettre les nouvelles demandes d’associations” and check that the option “Accès à distance sécurisé à Freebox OS” is active in “Gestion des ports” > “Connexions entrantes”.
The first time Home Assistant will connect to your Freebox, you will need to authorize it by pressing the right arrow on the facade of the Freebox when prompted to do so.
Only the routers with Freebox OS are supported:
- Freebox V7 also known as Freebox Delta
- Freebox V6 also known as Freebox Revolution
- Freebox mini 4k
This platform offers presence detection by keeping track of the devices connected to a Freebox router.
Note that the Freebox waits for some time before marking a device as
inactive, meaning that there will be a small delay (1 or 2 minutes)
between the time you disconnect a device and the time it will appear
as “away” in Home Assistant. You should take this into account when specifying
On the contrary, the Freebox immediately reports devices newly connected, so
they should appear as “home” almost instantly, as soon as Home Assistant
refreshes the devices states.
This platform offers you sensors to monitor a Freebox router. The monitored conditions are instant upload and download rates in KB/s.