Broadlink


There is currently support for the following device types within Home Assistant:

Sensor

The broadlink sensor platform let you monitor data from an RM2 and A1 E-air. There is currently no support for the cloud API.

To enable it, add the following lines to your configuration.yaml:

# Example configuration.yaml entry
sensor:
  - platform: broadlink
    host: IP_ADDRESS
    mac: 'MAC_ADDRESS'
    monitored_conditions:
      - 'temperature'

Configuration options:

Configuration Variables

host

(string)(Required)The hostname/IP address to connect to.

mac

(string)(Required)Device mac address.

name

(String)(Optional)Sensor name.

Default value: Broadlink sensor

scan_interval

(integer)(Optional)Time in seconds to fetch data from sensors.

Default value: 300

timeout

(integer)(Optional)Timeout in seconds for the connection to the device.

Default value: 10

monitored_conditions

(list)(Required)

‘temperature’

Temperature

‘humidity’

Humidity

‘air_quality’

Air quality

‘light’

Light

‘noise’

Noise

To set it up, add the following information to your configuration.yaml file:

Obtain sensor data from an A1:

sensor:
  - platform: broadlink
    scan_interval: 60
    host: IP_ADDRESS
    mac: 'MAC_ADDRESS'
    monitored_conditions:
      - temperature
      - humidity
      - air_quality
      - light
      - noise

Obtain temperature data from an RM2:

sensor:
  - platform: broadlink
    scan_interval: 60
    host: IP_ADDRESS
    mac: 'MAC_ADDRESS'
    monitored_conditions:
      - temperature

Microsoft Windows installation

The pycrypto library needs to be available on your platform. On a typical windows sysytem pip install pycrypto will fail, as a compiler needs to be installed first.

The quickest way around this is to use a pre-built binary, e.g., from https://github.com/sfbahr/PyCrypto-Wheels

Be sure to get the correct 64 or 32-bit binary for your system, the full command line will look something like the sample below for a 64-bit system:

pip install --use-wheel --no-index --find-links=https://github.com/sfbahr/PyCrypto-Wheels/raw/master/pycrypto-2.6.1-cp35-none-win_amd64.whl pycrypto

Switch

This Broadlink switch platform allow to you control Broadlink devices.

Configuration

To enable it, add the following lines to your configuration.yaml:

# Example configuration.yaml entry
switch:
  - platform: broadlink
    host: IP_ADDRESS
    mac: 'MAC_ADDRESS'

Configuration Variables

host

(string)(Required)The hostname/IP address to connect to.

mac

(string)(Required)Device MAC address.

timeout

(integer)(Optional)Timeout in seconds for the connection to the device.

friendly_name

(string)(Optional)The name used to display the switch in the frontend.

type

(string)(True/false)Switch type. Choose one from: rm, rm2, rm_mini, rm_pro_phicomm, rm2_home_plus, rm2_home_plus_gdt, rm2_pro_plus, rm2_pro_plus2, rm2_pro_plus_bl, rm_mini_shate, sp1, sp2, honeywell_sp2, sp3, spmini2, spminiplus or mp1. SC1 devices can be registered as sp2.

switches

(array)(Optional)The array that contains all switches.

identifier

(string)(Required)Name of the command switch as slug. Multiple entries are possible.

command_on

(string)(Required)Base64 encoded packet from RM device to take for on.

command_off

(string)(Required)Base64 encoded packet from RM device to take for off.

friendly_name

(string)(Optional)The name used to display the switch in the frontend.

slots

(array)(Optional)Friendly names of 4 slots of MP1 power strip. If not configured, slot name will be switch's friendly_name + 'slot {slot_index}'. e.g ‘MP1 slot 1’

slot_1

(string)(Optional)Friendly names of slot 1

slot_2

(string)(Optional)Friendly names of slot 2

slot_3

(string)(Optional)Friendly names of slot 3

slot_4

(string)(Optional)Friendly names of slot 4

Information about how to install on Windows can be found here.

How to obtain IR/RF packets?

Choose Call Service from the Developer Tools. Choose the service switch.broadlink_learn_command from the list of Available services: and hit CALL SERVICE. Press the button on your remote with in 20 seconds. The packet will be printed as a persistent notification in the States page of the web interface.

Example config for rm, rm2, rm_mini, rm_pro_phicomm, rm2_home_plus, rm2_home_plus_gdt, rm2_pro_plus, rm2_pro_plus2, rm2_pro_plus_bl and rm_mini_shate devices:

switch:
  - platform: broadlink
    host: 192.168.1.2
    mac: 'B4:43:0D:CC:0F:58'
    timeout: 15
    switches:
      # Will work on most Phillips TVs:
      tv_phillips:
        friendly_name: "Phillips Tv Power"
        command_on: 'JgAcAB0dHB44HhweGx4cHR06HB0cHhwdHB8bHhwADQUAAAAAAAAAAAAAAAA='
        command_off: 'JgAaABweOR4bHhwdHB4dHRw6HhsdHR0dOTocAA0FAAAAAAAAAAAAAAAAAAA='
      # Will work on most LG TVs
      tv_lg:
        friendly_name: "LG Tv Power"
        command_on: 'JgBYAAABIJISExETETcSEhISEhQQFBETETcROBESEjcRNhM1EjcTNRMTERISNxEUERMSExE2EjYSNhM2EhIROBE3ETcREhITEgAFGwABH0oSAAwzAAEfShEADQU='
        command_off: 'JgBYAAABIJISExETETcSEhISEhQQFBETETcROBESEjcRNhM1EjcTNRMTERISNxEUERMSExE2EjYSNhM2EhIROBE3ETcREhITEgAFGwABH0oSAAwzAAEfShEADQU='
      tv_lg_hdmi1_hdmi2:
        friendly_name: "LG Tv HDMI12"
        command_on: 'JgBIAAABIZMRExITEjYSExMRERURExEUEDkRNxEUEjYSNhM3ETcSNxITETgSNhI2ExMQExE4ETYSNxIUERMSExE4ETcRFBETEQANBQ=='
        command_off: 'JgBQAAABJJMSEhISETgSEhITEBMSEhMSETcSNxMREjcSNxI3EjcSOBETERITNhM2EhITERM2EzcRNxI3ExISEhI3EjcRExETEgAFLQABJEoRAA0FAAAAAAAAAAA='
      tv_lg_hdmi3:
        friendly_name: "LG Tv HDMI3"
        command_on: 'JgBIAAABIZMSFBISETgRExEUERQQFBETEjcTNhMSETgRNxE3EjcROBM2ERMSFBE4ERMSNxM2EjUSFBE2ETgRExM2ExITEhATEwANBQ=='
      tv_lg_av1_av2:
        friendly_name: "LG Tv AV12"
        command_on: 'JgBIAAABIpQPFBITETgSEw8UEhQSEhEVDzgSOBAUETgQOQ84EjgRNxITETgSExA5EDgREhI3EhMROBMSEDkQFBETEjYTEhE4EQANBQ=='
        command_off: 'JgBIAAABH5YPFBETETgUERAUEBURFBATETgROBEUETcSNxE4ETcSOBISEBUQFREUEjUSFBA5ETcRNxE4ETkQOBAUEjcRFRAUEQANBQ=='
  - platform: broadlink
    host: 192.168.1.2
    mac: 'B4:43:0D:CC:0F:58'
    timeout: 15
    switches:
    # Will work on most Phillips TVs:
      tv:
        friendly_name: "Phillips Tv"
        command_on: 'JgAcAB0dHB44HhweGx4cHR06HB0cHhwdHB8bHhwADQUAAAAAAAAAAAAAAAA='
        command_off: 'JgAaABweOR4bHhwdHB4dHRw6HhsdHR0dOTocAA0FAAAAAAAAAAAAAAAAAAA='

Example config for sp1, sp2, honeywell_sp2, sp3, spmini2 and spminiplus devices:

switch:
  - platform: broadlink
    host: IP_ADDRESS
    mac: 'MAC_ADDRESS'
    type:  sp1
    friendly_name: 'Humidifier'
  - platform: broadlink
    host: IP_ADDRESS
    mac: 'MAC_ADDRESS'
    type:  sp2
    friendly_name: 'Humidifier'

Example config for mp1 device:

switch:
  - platform: broadlink
    host: IP_ADDRESS
    mac: 'MAC_ADDRESS'
    type: mp1
    friendly_name: 'MP1'
    slots:
      # friendly name of slots - optional
      # if not set, slot name will be switch's friendly_name + 'slot {slot_index}'. e.g 'MP1 slot 1'
      slot_1: 'TV slot'
      slot_2: 'Xbox slot'
      slot_3: 'Fan slot'
      slot_4: 'Speaker slot'

Service broadlink_send_packet

You can use the service switch.broadlink_send_packet to directly send IR packets without the need to assign a switch entity for each command.

Service data attribute Optional Description
packet no String or list of strings that contain the packet data.

Example:

script:
  tv_select_source:
    sequence:
      - service: switch.broadlink_send_packet_192_168_0_107
        data:
          packet:
            - "JgCMAJSSFDYUNhQ2FBEUERQRFBEUERQ2FDYUNhQRFBEUERQRFBEUERQRFDYUERQRFBEUERQRFDYUNhQRFDYUNhQ2FDYUNhQABfWUkhQ2FDYUNhQRFBEUERQRFBEUNhQ2FDYUERQRFBEUERQRFBEUERQ2FBEUERQRFBEUERQ2FDYUERQ2FDYUNhQ2FDYUAA0FAAAAAAAAAAAAAAAA"
            - "JgBGAJSTFDUUNhM2ExITEhMSExITEhM2EzYTNhQRFBEUERQRFBEUNRQ2ExITNhMSExITNhMSExITEhM2ExITNhQ1FBEUNhMADQUAAA=="

Using E-Control remotes

If you already have your remotes learned on E-Control app you can use this method to “copy” them to Home Assistant.

First get or learn all the remotes you want to add to Home Assistant in E-Control

  1. Download

    Get the script from here.

  2. Dump the data from the app

    Open the E-Control app on your mobile device. On the left side menu choose “Share” and then “Share to other phones in WLAN”. It will generate the files you will need for the script.

  3. Get data from your Android device

    Connect your Android device to your computer and browse the SD card/External Storage folder “/broadlink/newremote/SharedData/”. You need to get the following files and put them in the same folder as this script:

    jsonSubIr jsonButton jsonIrCode

  4. Install Requirements

    Run pip install simplejson. You must install simplejson in the same python version you will use to run the scripts. You can ensure that the current version is installed by attempting to install again and confirming that you see “Requirement already satisfied”.

  5. Get the data from the device

    Navigate to the folder you downloaded and run python getBroadlinkSharedData.py. Follow the steps on screen. NOTE: These scripts were only tested with Python 2.7.

  6. Install python-broadlink library:

     git clone https://github.com/mjg59/python-broadlink.git
     cd python-broadlink
     sudo python setup.py install
    
  7. Test the codes Use the sendcode script you have already downloaded to test the codes you got from the device. You need to edit the script with your RM Pro IP Address and MAC Address and with the code in HEX format. When run the script, you know the code works when get message. Code sent… Not every code works.

  8. Convert the HEX codes to base64. Use this tool to convert the hex codes to base64 for use with Home Assistant.

Using iOS and Windows to obtain codes

  1. Use the E-Control app to learn the codes from all of your suitable remotes. Depending on the remote, try to add useful names for the buttons and/or the remotes. This will mean that you should only have to run this process once and will help with getting them quickly into Home Assistant. Dump the files in the app by navigating to the hamburger icon, select share and select, then choose Share to other phones on WLAN.

  2. Install Requirements

    • Download and install Python 2.7 on your windows PC.
    • Run pip install simplejson. You must install simplejson in the same python version you will use to run the scripts. You can ensure that the current version is installed by attempting to install again and confirming that you see “Requirement already satisfied”.
    • Download and install iBackup Viewer.
    • Download these github files. Make sure you place them in the \Python27 path in Windows. Be sure that the getBroadlinkSharedData.py from the download is in this directory.
  3. Plug your iphone into your windows PC, open iTunes and create a non-encrypted backup of your device.

  4. Open iBackup viewer then select the iOS backup that you created. Navigate to the App icon and then scroll until you find e-control.app, select this. Select and extract the files jsonButton, jsonIrCode and jsonSublr; they will be located in the Documents/SharedData section. Put these in the same location as the getBroadlinkSharedData.py.

  5. Now open a Command Prompt and navigate to the directory where the aforementioned files are located e.g. C:\Python27. Now run the command python getBroadlinkSharedData.py, you should see something like this:

     C:\Python27>python getBroadlinkSharedData.py
     ID: 1 | Name: TV
     ID: 2 | Name: Upstairs
     ID: 3 | Name: Sort in order
     ID: 4 | Name: Soundbar
     ID: 5 | Name: TV
     ID: 6 | Name: Xbox One
     ID: 7 | Name: User-Defined Aircon
     ID: 8 | Name: Sort in order
     ID: 9 | Name: User-Defined Aircon
     ID: 10 | Name: Kids Fan
     ID: 11 | Name: Downstairs
     ID: 12 | Name: Ceiling Fan
     ID: 13 | Name: Samsung TV
     ID: 14 | Name: Xbox One
     ID: 15 | Name: SONY SoundBar
     ID: 16 | Name: Fire TV
     ID: 17 | Name: New RF Remote
    

    Select the remote ID you would like to extract:

     Select accessory ID: 5
     [+] You selected:  TV
     [+] Dumping codes to TV.txt
    
  6. Now there should be a file with the name of the remote you chose in the same directory ending in .txt. Open that up and it will contain the Base64 code required for Home Assistant. To ensure these codes work correctly you may need to add == to the end of the code in your config.yaml file (or wherever you have your switches).

Using Windows to obtain codes with Broadlink Manager

  1. Install Broadlink Manager from this SourceForge link here.
  2. Open the application and hit “scan” to activate your broadlink device.
  3. Hit “Learn New Command” and follow instructions on screen.
  4. The “OnRawData Base64” is the value to be used with Home Assistant.

Using Node-RED to obtain codes

  1. Install the Broadlink Control palette in Node-RED (click the Hamburger menu at top right corner> Settings> Palette> Install and type Broadlink. Click install on the node-red-contrib-broadlink-control.
  2. Once installed, verify that the new palette titled broadlink is available in the nodes menu.
  3. Drag the RM node to an empty flow and double click to configure the node.
    a. give your RM device a name for easy identification
    b. click on the pencil to edit the device information
    c. enter the MAC address of the Broadlink RM PRO or RM Mini
    d. enter the IP address of the Broadlink RM PRO or RM mini
    e. leave the Catalog field empty.
    
  4. Click Update, and the device field should show the MAC address of the newly added device. If not, just select it.
  5. In the Action field, select Learn, then click Done.
  6. Drag an Inject node to the left of the RM node and link them. The type of inject doesn’t matter. Leave it to the defaults.
  7. Drag a Template node on the Flow to the right of the RM node and link it to the RM node.
  8. Double click the Template node to edit it, select:
    Property: msg.payload
    Format: Mustache template
    Template field: enter ''.
    Output as: Plain text
    
  9. Drag a Debug node to the right of the Template node and link them.
  10. Show the debug messages, deploy the flow and click on the inject button.
  11. A message will show in the debug window:
    3/23/2019, 9:56:53 AMnode: RM_Mini1
    msg : string[47]
    "Please tap the remote button within 30 seconds."
    
  12. Point the IR remote control at the RM device and click the desired button for about 2 seconds. An array of numbers will show in the debug window. For example:
    '38,0,132,3,19,18,19,18,19,18,19,17,20,54,20,54,20,54,19,18,19,18,19,18,19,17,20,17,20,17,20,54,20,17,19,18,19,18,19,18,19,17,20,17,20,54,20,17,20,54,19,55,19,54,20,54,20,54,19,55,19,0,6,6,150,146,20,54,20,54,20,54,19,18,19,18,19,18,19,17,20,17,20,54,20,54,19,55,19,18,19,17,20,17,20,17,20,17,20,17,20,54,19,18,19,18,19,18,19,17,20,17,20,17,20,54,19,18,19,55,19,54,20,54,20,54,20,54,19,55,19,0,6,6,150,146,20,54,20,54,19,55,19,18,19,17,20,17,20,17,20,17,20,54,19,55,19,54,20,17,20,17,20,17,20,17,20,17,19,18,19,55,19,17,20,17,20,17,20,17,20,17,19,18,19,55,19,18,19,54,20,54,20,54,19,55,19,54,20,54,20,0,6,5,150,146,20,54,20,54,20,54,19,18,19,18,19,18,19,17,20,17,20,54,20,54,19,55,19,18,19,17,20,17,20,17,20,17,20,17,20,54,19,18,19,18,19,18,19,17,20,17,20,17,20,54,19,18,19,55,19,54,20,54,20,54,19,55,19,54,20,0,6,6,149,147,20,54,19,55,19,54,20,17,20,17,20,17,20,17,20,17,19,55,19,54,20,54,20,17,20,17,20,17,19,18,19,18,19,18,19,54,20,17,20,17,20,17,20,17,19,18,19,18,19,54,20,17,20,54,20,54,20,54,19,...'
    

    This is the code we need to transmit again to replicate the same remote function.

Using Node red to Transmit Codes

  1. Drag another RM node on the same flow we created earlier. The RM node should be configured to the RM device created earlier by default.
  2. In the Action field, select - Set from msg.payload -.
  3. Drag an Inject node and give it a meaningful name relevant to the remote control button function, like “TV On” or “TV Source”.
  4. Drag a template node and double click it to configure:
    Property: msg.payload
    Format: Mustache template
    Template: enter the following:
    '{
       "action" : "send",
       "data" : [ 38, 0, 34, 1, 40, 15, 40, 15 ] // Here you must enter the entire code from point 12 above, without the trailing "."
    }'
    In the Output as field, "select Parsed JSON".
    
  5. Click Done.
  6. Drag a debug node and connect it to the output of the RM node.
  7. Connect the Inject node to the Template node, and the template node to the RM node.
  8. Click Deploy to activate the flow, and then click the inject button. The debug window should show a debug message. For example:
    {"action":"send","data":   [38,0,152,0,0,1,39,148,19,18,18,19,18,55,19,18,18,19,18,19,18,19,18,55,18,56,18,19,18,55,18,19,18,56,18,18,19,55,18,19,18,19,18,18,18,56,18,19,18,18,19,55,18,56,18,18,19,18,18,19,18,19,18,55,19,18,18,19,18,19,18,19,18,18,18,19,18,19,18,55,19,55,18,19,18,19,18,18,19,18,18,56,18,19,18,18,19,55,18,56,18,18,19,18,18,19,18,19,18,19,18,18,19,18,18,56,18,55,18,19,18,19,18,19,18,18,19,55,18,19,18,55,19,18,18,56,18,19,18,18,19,18,18,19,18,19,18,19,18,18,18,56,18,0,13,5],"status":"OK"}
    

    The “status” : “OK” at the end is a feedback that the Broadlink RM device is connected and has transmitted the payload.

Now you can add as many template nodes, each having a specific code, and add any type of input nodes to activate the template and transmit the code.