The EZcontrol XS1 integration for Home Assistant allows you to observe and control devices configured on the XS1 Gateway. Please have a look at the official documentation for using this gateway Bedienungsanleitung v184.108.40.206.
Add the following entry to the
# Example configuration.yaml entry xs1: host: "192.168.2.100"
The integration will automatically detect the configuration of the XS1 Gateway only on initialization which currently means when Home Assistant boots. When you change the configuration of the XS1 you (currently) have to restart Home Assistant to see the effects.
Host of the XS1 Gateway.
Custom port if you are running your gateway behind some kind of proxy.
httpsshould be used for API requests (only possible via your own proxy).
User to access XS1 web API.
Password to access XS1 web API.
Any type of sensor is supported.
||Partly||Dimmers are currently handled like switches so actual dimming is not supported :(|
Home Assistant can combine temperature sensors and climate actuators into a single device. The XS1 gateway does not allow this, but a sensor and actuator can be configured separately. To make Home Assistant register them in the same climate device just prefix the sensor name with the actuator name on the XS1 gateway configuration, f.ex:
- Actuator device name: “Bedroom_Temp”
- Sensor device name: “Bedroom_Temp_Sensor”
In this section, you find some real-life examples of how to use this component.
This example shows how you can use the optional configuration options.
# Example configuration.yaml entry xs1: host: "192.168.2.100" port: 80 ssl: false username: myuser password: 123totallySecure