OSO Energy

The OSO Energy integration for Home Assistant allows you to interact with supported devices and services offered by OSO Energy

This OSO Energy integration uses a subscription key, which a user can create for his account on the OSO Energy website, to configure it within Home Assistant. Once configured Home Assistant will detect and add all OSO Energy devices.

Configuration

To add the OSO Energy integration to your Home Assistant instance, use this My button:

Binary sensors

The OSO Energy integration exposes OSO Energy data as a binary sensor. It provides the following binary sensors:

• Extra energy
  • Indication if the water heater is currently in an extra energy/high demand state.
• Power save
  • Indication if the water heater is currently in a power save/sleep mode state.
• Heating
  • Indication if the water heater is currently heating the water.

Sensors

The OSO Energy integration exposes OSO Energy data as a sensor. It provides the following sensors:

• Heater Mode for water heaters.
  • Indication of the current heater mode on the device.
• Optimization Mode for water heaters.
  • Indication of the way heating is managed by the device according to external factors. For example, electricity prices.
• Power load (kW) for water heaters.
  • Indication of the current power load of the water heater - how much energy is currently drawn out of the electricity grid.
• Tapping capacity (kWh) for water heaters.
  • Indication for quantity of energy that is stored and available for use at the moment - the current kWh equivalent capacity of the water heater.
• Capacity mixed water at 40°C (L) for water heaters.
  • Indication of the current quantity of water that can be drained out after mixing the water in the heater with the inlet tap water to produce water at 40°C.
• V40 Min (L) for water heaters.
  • The current minimum allowed quantity of mixed water at 40°C. When the current capacity drops below this threshold, the heater will turn on as a feature to guard against cold water.
• Minimum Level of V40 Min (L) for water heaters.
  • The lower boundary of the V40 Min sensor that can be achieved during normal operation of the water heater. Can vary depending on the type of the heater.
• Maximum Level of V40 Min (L) for water heaters.
  • The upper boundary of the V40 Min sensor that can be achieved during normal operation of the water heater. Can vary depending on the type of the heater.
• Temperature top
  • The current measured temperature of the water from the top sensor of the water heater.
• Temperature middle
  • The current measured temperature of the water from the middle sensor of the water heater.
• Temperature bottom
  • The current measured temperature of the water from the bottom segment of the water heater.
• Temperature one
  • The current measured temperature of the water from the one wire sensor of the water heater.

Water heater

The OSO Energy water heater integration integrates your OSO Energy devices into Home Assistant.

It supports the following OSO Energy devices:

• Water Heaters
• Sensors