bbox platform uses the Bbox Modem Router from the French Internet provider Bouygues Telecom. Sensors are mainly bandwidth measures.
There is currently support for the following device types within Home Assistant:
Bbox is a generic name for different hardware routers. The platform has been tested with the following devices:
- Sagem [email protected] 5330b
To use an Bbox router in your installation, add the following to your
# Example configuration.yaml entry device_tracker: - platform: bbox
See the device tracker integration page for instructions how to configure the people to be tracked.
To add Bbox sensors to your installation, add the following to your
# Example configuration.yaml entry sensor: - platform: bbox monitored_variables: - down_max_bandwidth - up_max_bandwidth - current_down_bandwidth - current_up_bandwidth - uptime - number_of_reboots
Name to display in the frontend.
Sensors to display in the frontend.
Maximum bandwidth available for download.
Maximum bandwidth available for upload.
Instant measure of the current used bandwidth for download.
Instant measure of the current used bandwidth for upload.
Uptime since the last boot.
Number of reboot since the initial configuration of the router.