tellduslive component let you connect to Telldus Live. It’s cloud platform that connects to your Tellstick Net or Tellstick ZNet connected gear at home.
If you are upgrading from 0.58 or older, you need to remove all Telldus configuration from your
configuration.yaml file before continuing.
Home Assistant will automatically discover the presence of a Tellstick Net or Tellstick ZNet on your local network if the discovery component is enabled. When discovery and the key exchange with Telldus Live have been completed, you will be presented with an option to integrate with the cloud or local API for direct communication with your hardware in your LAN. Local API supports only one device at this stage. Local API is only supported with the Znet Lite products, the older hardware (such as Tellstick Net) does not support local API.
To manually integrate your Telldus Live with Home Assistant, e.g., if your device is on another network or in another location, add the following section to your
# Example configuration.yaml entry tellduslive:
It is only possible to configure the
scan_interval when setting up the device. If the polling interval needs to be changed after the device is configured it must be changed manually by changing
"scan_interval": 60, for the device in the file
The component will offer configuration through the Home Assistant user interface where it will let you associate it with your Telldus Live account.