flux_led support is integrated into Home Assistant as a light platform. Several brands of both bulbs and controllers use the same protocol and they have the HF-LPB100 chipset in common. The chances are high that your bulb or controller (eg. WiFi LED CONTROLLER) will work if you can control the device with the MagicHome app.
Example of bulbs:
- Flux Smart Lighting
- MagicLight® Plus - WiFi Smart LED Light Bulb4
- Flux WiFi Smart LED Light Bulb4
- WIFI smart LED light Bulb1
Examples of controllers:
To enable those lights, add the following lines to your
# Example configuration.yaml entry light: - platform: flux_led
To enable the automatic addition of lights on startup.
A list of devices with their ip address.
A friendly name for the device.
The chosen brightness mode, options are:
Set this to
ledenetif you are using a ledenet bulb.
A definition of the custom effect.
A list of 1 to 16 colors, used in the effect loop (see example below). Defined as three comma-separated integers between 0 and 255 that represent the color in RGB. There is no way to set brightness, but you can define lower RGB values to simulate lower brightness. E.g., if you want 50% red, define it as
A speed in percents (100 being the fastest), at which controller will transition between the colors.
A type of transition, which will be used to transition between the colors. Supported values are:
Depending on your controller or bulb type, there are two ways to configure brightness. The integration defaults to rgbw. If your device has a separate white channel, you do not need to specify anything else; changing the white value will adjust the brightness of white channel keeping rgb color constant. However, if your device does not have a separate white channel, you will need to set the mode to rgb. In this mode, the device will keep the same color, and adjust the rgb values to dim or brighten the color.
Will automatically search and add all lights on start up:
# Example configuration.yaml entry light: - platform: flux_led automatic_add: true
Will add two lights with given name and create an automation rule to randomly set color each 45 seconds:
light: # Example configuration.yaml entry - platform: flux_led devices: 192.168.0.106: name: flux_lamppost 192.168.0.109: name: flux_living_room_lamp automation: alias: random_flux_living_room_lamp trigger: platform: time_pattern seconds: '/45' action: service: light.turn_on data: entity_id: light.flux_living_room_lamp effect: random
Will add a light without the white mode:
192.168.1.10: name: NAME mode: "rgb"
Will add a light with rgb+white mode (default). White and RGB channels can be adjusted independently using a slider and color picker respectively.
192.168.1.10: name: NAME mode: "rgbw"
Will add a light with white mode only. This is useful when only W channel is connected to an RGBW controller and allows the white level to be controlled via brightness value.
192.168.1.10: name: NAME mode: "w"
Some devices such as the Ledenet RGBW controller use a slightly different protocol for communicating the brightness to each color channel. If your device is only turning on or off but not changing color or brightness try adding the LEDENET protocol.
light: - platform: flux_led devices: 192.168.1.10: name: NAME protocol: 'ledenet'
The Flux Led light offers a number of effects which are not included in other lighting packages. These can be selected from the front-end, or sent in the effect field of the
||Smoothly transitions through the rainbow.|
||Jumps through seven different rainbow colors.|
||Strobes each rainbow color in a loop.|
||Fades between the color as indicated in the effect name and black.|
||Fades between red and green.|
||Fades between red and blue.|
||Fades between green and blue.|
||Strobes the color indicated by the effect name.|
||Chooses a random color by selecting random values for R, G, and B.|
||Custom effect (if defined, see below).|
Users can define their own custom effect. It consists of three parameters: a list of 1 to 16 colors, speed and type of transition. The controller will transition between the colors in a loop, with sepcified transition and speed. Here is an example of a custom effect that will quickly flash red, yellow, green, cyan, blue, magenta in a loop:
light: - platform: flux_led devices: 192.168.1.10: custom_effect: speed_pct: 100 transition: 'strobe' colors: - [255,0,0] - [255,255,0] - [0,255,0] - [0,255,255] - [0,0,255] - [255,0,255]