Snooz
Integrates SNOOZ devices into Home Assistant.
Configuration
To add the Snooz device to your Home Assistant instance, use this My button:
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the
Add Integration button. -
From the list, select Snooz.
-
Follow the instructions on screen to complete the setup.
The SNOOZ integration will automatically discover devices once the Bluetooth integration is enabled and functional.
Supported devices
Setup
Once a device is discovered, it needs to be put into pairing mode to complete setup.
Entering pairing mode
- Ensure the device is not connected to a mobile app or any other Bluetooth controller.
- Hold your finger on the power button until all buttons begin pulsing on and off (~ 5 seconds).
Platforms
Fan
Devices are exposed as Fan entities with a persistent connection to the device.
Fan speed percentage is mapped to the device volume level.
Speed percentages less than 10 have no effect - they all map to a value of 1 on the device.
List of actions
The Snooz integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] provides the following actions. Each link below opens a dedicated page with examples, parameters, and a step-by-step UI walkthrough.
-
Transition off (
snooz.transition_off) Gradually lowers a Snooz device’s volume, then turns it off. -
Transition on (
snooz.transition_on) Gradually changes a Snooz device’s volume over a set duration.
For an overview of every action across all integrations, see the actions reference.