Schlage

The Schlage integration provides connectivity with Schlage WiFi smart locks through Schlage’s cloud API.

Known working devices

• Schlage Encode Smart WiFi Deadbolt
• Schlage Encode Smart WiFi Lever
• Schlage Encode Plus Smart WiFi Deadbolt

Other devices not listed above have not been tested and may not function as expected.

There is currently support for the following device types within Home Assistant:

• Binary sensor
• Lock
• Sensor
• Switch

Configuration

To add the Schlage integration to your Home Assistant instance, use this My button:

Data updates

The Schlage integration fetches updated lock state data every 30 seconds.

Binary sensor

Once you have enabled the Schlage integration, you should see the following binary sensor:

• Keypad disabled - Indicates that the keypad has been disabled, typically due to too many incorrect lock codes being attempted.

Select

Once you have enabled the Schlage integration, you should see the following selects:

• Auto Lock Time - Configure the time until the deadbolt automatically locks, or disable the auto-lock feature entirely. For example, 0: auto-lock is disabled, 15: auto-lock after 15 seconds, 300: auto-lock after 5 minutes.

Sensor

Once you have enabled the Schlage integration, you should see the following sensors:

• Lock Battery

Switch

Once you have enabled the Schlage integration, you should see the following switches:

• 1-Touch Locking - When enabled, locks the lock with a press of the Schlage button.
• Keypress Beep - Controls whether the lock will emit beeping tones on use.

Removing the integration

This integration follows standard integration removal. No extra steps are required.

To remove an integration instance from Home Assistant

1. Go to Settings > Devices & services and select the integration card.
2. From the list of devices, select the integration instance you want to remove.
3. Next to the entry, select the three-dot menu. Then, select Delete.