The gpsd integration is using the GPS information collected by gpsd and a GPS receiver.


A requirement is that gpsd is installed ($ sudo apt-get install gpsd or $ sudo dnf -y install gpsd). gpsd uses the socket activation feature of systemd on recent Linux distributions for USB receivers. This means that if you plug your GPS receiver in, gpsd is started. Other GPS device may work too, but this was not tested.

$ sudo systemctl status [email protected][email protected] - Manage ttyUSB0 for GPS daemon
   Loaded: loaded (/usr/lib/systemd/system/[email protected]; static; vendor preset: disabled)
   Active: active (exited) since Sat 2016-07-16 09:30:33 CEST; 1 day 23h ago
  Process: 5303 ExecStart=/bin/sh -c [ "$USBAUTO" = true ] && /usr/sbin/gpsdctl add /dev/%I || : (code=exited, status=0/SUCCESS)
 Main PID: 5303 (code=exited, status=0/SUCCESS)

Jul 16 09:30:33 laptop019 systemd[1]: Starting Manage ttyUSB0 for GPS daemon...
Jul 16 09:30:33 laptop019 gpsdctl[5305]: gpsd_control(action=add, arg=/dev/ttyUSB0)
Jul 16 09:30:33 laptop019 gpsdctl[5305]: reached a running gpsd

To check if your setup is working, connect to port 2947 on the host where gpsd is running with telnet. This may need adjustments to your firewall.

$ telnet localhost 2947
Connected to localhost.
Escape character is '^]'.


To add the GPSD integration to your Home Assistant instance, use this My button: