Global Caché GC-100
The Global Caché GC-100 can be integrated into Home Assistant. GC-100 is a TCP-controllable hardware device which has an array of relays, RS232 serial ports, and flexible ports which can be programmed to be either digital inputs or IR blaster outputs. There are a variety of submodels of the GC-100 which have different amounts of each I/O type.
There is currently support for the following device types within Home Assistant:
Currently, only relays and ports configured to be digital inputs are supported in Home Assistant. For IR support, please use the iTach remote platform, but note that it will likely not function concurrently on the same GC100 due to limitations in the TCP socket server implementation used by Global Caché.
To enable this device, add the following lines to your
# Example configuration.yaml entry gc100: host: IP_ADDRESS
To enable this sensor, you first have to set up gc100, and add the following lines to your
# Example configuration.yaml entry binary_sensor: - platform: gc100 ports: - '3:1': Doorchime - '3:2': Garage Obstruction
This allows you to control and monitor the relay state on your GC100.
To enable this switch, you first have to set up gc100, and add the following lines to your
# Example configuration.yaml entry switch: - platform: gc100 ports: - '4:1': Siren - '4:2': Sprinkler