Climate

The Climate integrationIntegrations connect and integrate Home Assistant with your devices, services, and more.
[Learn more] allows you to control and monitor HVAC (heating, ventilating, and air conditioning) devices and thermostats.

Building block integration

This climate is a building block integration that cannot be added to your Home Assistant directly but is used and provided by other integrations.

A building block integration differs from the typical integration that connects to a device or service. Instead, other integrations that do integrate a device or service into Home Assistant use this climate building block to provide entities, services, and other functionality that you can use in your automations or dashboards.

If one of your integrations features this building block, this page documents the functionality the climate building block offers.

Services

Climate control services

Available services: climate.set_aux_heat, climate.set_preset_mode, climate.set_temperature, climate.set_humidity, climate.set_fan_mode, climate.set_hvac_mode, climate.set_swing_mode, climate.turn_on, climate.turn_off, climate.toggle

Not all climate servicesA service carries out one specific task, for example: turn on the light in the living room. A service has targets and data and can be called by actions, a dashboard, or via voice command.
[Learn more] may be available for your platform. You can check which climate services are available under Developer Tools -> Services.

Service climate.set_aux_heat

Turn auxiliary heater on/off for climate device

Service data attribute	Optional	Description
`entity_id`	yes	String or list of strings that define the entity ID(s) of climate device(s) to control. To target all climate devices, use `all`.
`aux_heat`	no	New value of auxiliary heater.

Automation example

automation:
  trigger:
    platform: time
    at: "07:15:00"
  action:
    - service: climate.set_aux_heat
      target:
        entity_id: climate.kitchen
      data:
        aux_heat: true

Service climate.set_preset_mode

Set preset mode for climate device. Away mode changes the target temperature permanently to a temperature reflecting a situation where the climate device is set to save energy. For example, this may be used to emulate a “vacation mode.”

Service data attribute	Optional	Description
`entity_id`	yes	String or list of strings that define the entity ID(s) of climate device(s) to control. To target all climate devices, use `all`.
`preset_mode`	no	New value of preset mode.

Automation example

automation:
  trigger:
    platform: time
    at: "07:15:00"
  action:
    - service: climate.set_preset_mode
      target:
        entity_id: climate.kitchen
      data:
        preset_mode: "eco"

Service climate.set_temperature

Set target temperature of climate device

Service data attribute	Optional	Description
`entity_id`	yes	String or list of strings that define the entity ID(s) of climate device(s) to control. To target all climate devices, use `all`.
`temperature`	yes	New target temperature for climate device (commonly referred to as a setpoint). Do not use if `hvac_mode` is `heat_cool`.
`target_temp_high`	yes	The highest temperature that the climate device will allow. Required if `hvac_mode` is `heat_cool`. Required together with `target_temp_low`.
`target_temp_low`	yes	The lowest temperature that the climate device will allow. Required if `hvac_mode` is `heat_cool`. Required together with `target_temp_high`.
`hvac_mode`	yes	HVAC mode to set the climate device to. This defaults to current HVAC mode if not set, or set incorrectly.

Automation examples

### Set temperature to 24 in heat mode
automation:
  trigger:
    platform: time
    at: "07:15:00"
  action:
    - service: climate.set_temperature
      target:
        entity_id: climate.kitchen
      data:
        temperature: 24
        hvac_mode: heat

### Set temperature range to 20 to 24 in heat_cool mode
automation:
  trigger:
    platform: time
    at: "07:15:00"
  action:
    - service: climate.set_temperature
      target:
        entity_id: climate.kitchen
      data:
        target_temp_high: 24
        target_temp_low: 20
        hvac_mode: heat_cool

Service climate.set_humidity

Set target humidity of climate device

Service data attribute	Optional	Description
`entity_id`	yes	String or list of strings that define the entity ID(s) of climate device(s) to control. To target all climate devices, use `all`.
`humidity`	no	New target humidity for climate device

Automation example

automation:
  trigger:
    platform: time
    at: "07:15:00"
  action:
    - service: climate.set_humidity
      target:
        entity_id: climate.kitchen
      data:
        humidity: 60

Service climate.set_fan_mode

Set fan operation for climate device

Service data attribute	Optional	Description
`entity_id`	yes	String or list of strings that define the entity ID(s) of climate device(s) to control. To target all climate devices, use `all`.
`fan_mode`	no	New value of fan mode

Automation example

automation:
  trigger:
    platform: time
    at: "07:15:00"
  action:
    - service: climate.set_fan_mode
      target:
        entity_id: climate.kitchen
      data:
        fan_mode: "On Low"

Service climate.set_hvac_mode

Set climate device’s HVAC mode

Service data attribute	Optional	Description
`entity_id`	yes	String or list of strings that define the entity ID(s) of climate device(s) to control. To target all climate devices, use `all`.
`hvac_mode`	no	New value of HVAC mode

Automation example

automation:
  trigger:
    platform: time
    at: "07:15:00"
  action:
    - service: climate.set_hvac_mode
      target:
        entity_id: climate.kitchen
      data:
        hvac_mode: heat

Service climate.set_swing_mode

Set swing operation mode for climate device

Service data attribute	Optional	Description
`entity_id`	yes	String or list of strings that define the entity ID(s) of climate device(s) to control. To target all climate devices, use `all`.
`swing_mode`	no	New value of swing mode

Automation example

automation:
  trigger:
    platform: time
    at: "07:15:00"
  action:
    - service: climate.set_swing_mode
      target:
        entity_id: climate.kitchen
      data:
        swing_mode: 1

Service climate.turn_on

Turn climate device on. This is only supported if the climate device supports being turned off.

Service data attribute	Optional	Description
`entity_id`	yes	String or list of strings that define the entity ID(s) of climate device(s) to control. To target all climate devices, use `all`.

Service climate.turn_off

Turn climate device off. This is only supported if the climate device has the HVAC mode off.

Service data attribute	Optional	Description
`entity_id`	yes	String or list of strings that define the entity ID(s) of climate device(s) to control. To target all climate devices, use `all`.

Service climate.toggle

Toggle climate device. This is only supported if the climate device supports being turned on and off.

Service data attribute	Optional	Description
`entity_id`	yes	String or list of strings that define the entity ID(s) of climate device(s) to control. To target all climate devices, use `all`.

Attributes

The climate entity has extra attributes to represent the state of the thermostat.

Name	Description
`hvac_action`	Current state: `heating` / `cooling` / `idle`.
`fan`	If the fan is currently on or off: `on` / `off`.

It depends on the thermostat you are using which states are available.

Help us to improve our documentation

Suggest an edit to this page, or provide/view feedback for this page.

Edit Provide feedback View pending feedback