Velbus


The velbus component supports the Velbus USB, Velbus serial and a TCP/IP gateway.

There is currently support for the following device types within Home Assistant:

  • Binary Sensor
  • Climate
  • Sensor
  • Switch

Configuration

The gateway needs to be configured by adding the following lines to your configuration.yaml file:

# Example configuration.yaml entry for a USB or serial interface
velbus:
  port: '/dev/ttyUSB00'
# Example configuration.yaml entry for a TCP/IP interface
velbus:
  port: '127.0.0.1:3678'

Configuration Variables

port

(string)(Required)The port where your board is connected to your Home Assistant host.