Enigma2 (OpenWebif)


The enigma2 platform allows you to control a Linux based set-top box which is running Enigma2 with the OpenWebif plugin installed.

OpenWebif is an open source web interface for Enigma2 based set-top boxes.

Enigma2 devices should be discovered automatically by using the the discovery component.

To manually add a set-top box to your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
media_player:
  - platform: enigma2
    host: IP_ADDRESS

Configuration Variables

host

(string)(Required)

The IP/hostname of the Enigma2 set-top box on your home network.

use_channel_icon

(boolean)(Optional)

By default, a screen grab of the current channel is shown. If you prefer the channel icon to be shown instead, set this to true.

Default value:

false

deep_standby

(boolean)(Optional)

If set to true, when the user selects Turn Off, the box will go into “deep standby” mode, meaning it can be only awoken by the remote control or via Wake On Lan (if box supports that).

Default value:

false

mac_address

(string)(Optional)

If specified, a Wake On Lan packet is sent to this MAC address, when Turn On is selected.

Default value:

empty

source_bouquet

(string)(Optional)

Provide a specific bouquet reference for the bouquet you would like to see loaded into the media player “Sources” interface.

Default value:

empty

port

(integer)(Optional)

Port which OpenWebif is listening on.

Default value:

80

username

(string)(Optional)

The username of a user with privileges to access the box. This is only required if you have enabled the setting “Enable HTTP Authentication” in OpenWebif settings. (e.g., on the remote by pressing Menu>Plugins>OpenWebif).

Default value:

root

password

(string)(Optional)

The password for your given account. Again, this is only required if you have enabled the setting “Enable HTTP Authentication” in OpenWebif settings. (e.g., on the remote by pressing Menu>Plugins>OpenWebif).

Default value:

dreambox

ssl

(boolean)(Optional)

Use HTTPS instead of HTTP to connect. This is only required if you have enabled the setting “Enable HTTPS” in OpenWebif settings. (e.g., on the remote by pressing Menu>Plugins>OpenWebif). You will need to ensure you have a valid CA certificate in place or SSL verification will fail with this component.

Default value:

false

name

(string)(Optional)

A name for easy identification of the device.

Default value:

Enigma2 Media Player