push camera platform allows you to integrate images sent over HTTP POST to Home Assistant as a camera. External applications/daemons/scripts are therefore able to “stream” images through Home Assistant.
Optionally the Push Camera can buffer a given number of images, creating an animation of the detected motion after the event has been recorded.
Images are cleared on new events, and events are separated by a soft (configurable) timeout.
push camera can as an example be used with motionEye a web frontend for the motion daemon. motionEye is usually configured to save/record files only when motion is detected. It provides a hook to run a command whenever an image is saved, which can be used together with cURL to send the motion detected images to the
push camera, as shown in this example:
In motionEye, under File Storage -> Run A Command type in:
curl -X POST -F "[email protected]%f" http://my.hass.server.com:8123/api/webhoo\k/my_custom_webhook_id # inserting a backslash in the middle of "webhook" stops Motion to move the command to a webhook
Optionally configure motionEye to save only motion triggered images by going into Still Images -> Capture Mode and setting Motion Triggered. Tune your preferences under Motion Detection.
In this setup, you can configure the push camera to continuously replay the last motion triggered event using a configuration such as:
camera: - platform: push name: MotionEye Outdoor buffer: 3 timeout: 5 webhook_id: my_custom_webhook_id
To enable this camera in your installation, add the following to your
# Example configuration.yaml entry camera: - platform: push name: My Push Camera webhook_id: my_custom_webhook_id
(string)(Optional)The name you would like to give to the camera.
Default value: Push Camera
(string)(Optional)Number of images to buffer per event. Be conservative, large buffers will starve your system memory.
Default value: 1
(time)(Optional)Amount of time after which the event is considered to have finished.
Default value: 5 seconds
(string)(Required)User provided string acting as camera identifier and access control, should be a large string (more then 8 chars).
(string)(Optional)HTTP POST field containing the image file
Default value: image