openevse sensor platform pulls data from an OpenEVSE Charging station equipped with an ESP8266-based wifi connection.
To enable this sensor in your installation, add the following to your
# Example configuration.yaml entry sensor: - platform: openevse host: IP_ADDRESS monitored_variables: - status
(string)(Required)The IP address or hostname of your charger.
(list)(Required)Conditions to display on the frontend.
The status of the charger (i.e., “Connected”, “Charging”, etc.).
The number of minutes the charging has been charging, or 0 if it is not charging.
The temperature reported by the real time clock sensor, or 0 if the sensor is not installed.
The temperature reported by the IR remote sensor, or 0 if the sensor is not installed.
The temperature reported by the ambient sensor, or 0 if the sensor is not installed.
The energy usage for the current charging session.
The total energy usage for the device.