bbox platform uses the Bbox Modem Router from the French Internet provider Bouygues Telecom. Sensors are mainly bandwidth measures.
There is currently support for the following device types within Home Assistant:
Due to third party limitation, the sensors will only be available if Home Assistant and the Bbox are on the same local area network. You can check this by going to 192.168.1.254 with your web browser.
Bbox is a generic name for different hardware routers. The platform has been tested with the following devices:
- Sagem [email protected] 5330b
To use an Bbox router in your installation, add the following to your
# Example configuration.yaml entry device_tracker: - platform: bbox
For now and due to third party limitation, the Bbox must be on the same local network as the Home Assistant installation.
See the device tracker component page for instructions how to configure the people to be tracked.
To add Bbox sensors to your installation, add the following to your
# Example configuration.yaml entry sensor: - platform: bbox monitored_variables: - down_max_bandwidth - up_max_bandwidth - current_down_bandwidth - current_up_bandwidth
(string)(Optional)Name to display in the frontend.
Default value: Bbox
(list)(Required)Sensors to display in the frontend.